• Home > Production line

    Heavy Steel Plate Mill Lines Brief Introduction

    Founded in 1970, Our mill is the first producer capable of manufacturing wide and heavy steel plate of most complete product mix, widest specification range, highest product quality, most extensive application scope in China with 13.2 billion yuan total assets and more than 10,000 employees. The 4200mm plate mill in Our mill is the earliest extra wide and heavy plate mill of China. Our mill has over 30 years' experience and accumulated technology on wide and heavy steel plate production, establishing its unique and important position in China's wide and heavy steel plate industry.

    Our mill possesses one 4100m and one 4200mm wide and heavy steel plate mill lines, consisting of four UHP EAFs, one 120 t BOFs, eleven secondary refining and vacuum degassing units, nine massive ingot casting lines, one 300mmx1900mm slab continuous caster, two 300mmx2500mm slab continuous casters, one 4100mm twin stand plate mill and one 4200mm plate mill, with most complete steel plate heat treatment facilities , testing devices for scientific research and state level physical and chemical testing center.

    Among products of 12 category series, more than 400 steel grades produced by Our mill, more than 200 steel grades have been produced as import substitutes or according to foreign standards, more than 30 steel grades have been exported to many developed countries and regions such as USA, Germany and Japan etc. Our mill is also the drafting unit of five national standards of steel plate for building structure, crude oil and natural gas transmission pipe line and through thickness properties steel plate. In Oct.of 2010, the company was awarded the top prize of China Quality Management- National Quality Prize.

    Process Flow

    Blast Furnace Smelting→EAF(BOF)Melting→LF and VD Secondary Refining→Continuous Casting(mould casting)→ESR→Controlled Rolling and Controlled Cooling→Heat Treatment→Finishing

    1. Process Flow Chart

    2. Heavy Plate Production Flow Route

    Three extra heavy plate production and process routes

    designed for different demands.

    3. Capacity of Technological Installation

    (1) Ingot,continuous cast slab and steel plate production line of domestic largest specification

    Max.single piece weight of Ingot: 50T, max.single piece weight of plate:38T.

    Application of dynamic soft reduction and EMC

    Max.section size of slab: 330×2500mm

    Product dimension:

    thickness range : 6-650mm (700mm some up to 700mm)
    width range: 1150-4020mm
    length range: 3000-27000mm

      

    (2) Complete Secondary Refining Devices

    Seven 100 t LFs, five VDs and VODs

    Secondary refining rate of molten steel:100%

    Vacuum degassing rate:95%,high steel cleanliness

    Low residual content:

    P≤0.010%  S≤0.003%  N≤80ppm
    O≤20ppm   H≤2ppm

    (3) Advanced Rolling Equipment and Control Technologies

    (AGC) Hydraulic AGC  
    On-line Process Model Automatic Control
    Hydraulic Bending and Work Roll Axial shifting function
    Max.rolling load up to 86000 KN, a powerful rolling mill
    Accurate accelerated cooling capacity with DQ function
    4 Level Computer Control System

    (4) Most Complete Heat Treatment Facilities for Extra Heavy Plate at Home

    Ensure microstructure homogeneity, grain refinement and excellent properties of steel plate

    Including Normalizing furnace, quenching furnace, offline furnace, car bottom furnace, tempering furnace, slow cooling pit

    Quenching, tempering, normalizing and annealing functions 

    Annual Heat Treatment Capacity ≥1 million tons 

    Heat treatment size:

    8-650mm  Thickness
    1200-4020mm Width
    3000-18000mm Length

    (5) Advanced Slab ESR Furnace of Max. Single Piece Weight at home
       
    Our mill possesses 3 slab ESR furnaces, being the one with largest capacity and max.thickness slab, max.single piece weight of slab up to 50 t , max.single piece weight of plate up to 38 t, max.thickness of ESR slab 960 mm, providing ensurence to the assurance of large thickness Z direction steel plate and extra heavy steel plate.

    UHP EAF

    Two 100 t LFs and two 90 t LFs, annual steel output :5 million tons.

    100T VD 

    Three twin stand VDs with CCTV to monitor the entire degassing process of molten steel.

    Large Slab Continuous Caster

    Three large thickness slab continuous casters lines in total of 90t and 100 t capacities respectively. The slab size is 200/250/300/330×1300-2500mm, The largest cross section is 330×2500mm. All the casters apply various techniques such as straight mould, automatic mould level control, small vibration magnitude, high frequency, EMS, soft reduction, multi-point bending, multi-point straightening.

    Massive Ingot Casting Line

    Twelve ingot casting lines:the flat ingot types include 11.4t,13.5(15.3)t,20(23)t,28(31)t,35 t,40 t,45 t,50 t; max.single piece weight of taper type ingot is 80 t,which can be rolled into finish plate of 60t single piece weight.

    50t Slab ESR Furnace

    Integrating the state of art process technologies of low frequency power supply, dual pole serial connection and elevated mould, various steel grade ESR ingot of three thickness including 640mm,760mm and 960mm have been successfully developed. The steel is clean and microstructure is homogenous and refined.

    Soaking Pits

    Sixteen soaking pits, max.charging weight of a single pit is 160t

    Continuous Reheating Furnace

    The slab yard of the new production line is adjacent to the continuous caster and directly receives incoming slabs from the caster via interconnecting roller table. Various operations including secondary flame cutting, surface scarfing, on-line weighing, width and length measuring of slabs can be performed in the slab yard.

    4200mm Plate Mill

    Max.rolling force: 4200 t, thickness range of steel plate,max.width:4020mm Named as "the Merit Plate Mill" by China Iron and Steel Industry Association.

    4100mm Plate Mill

    Max. permissible rolling force:86000KN,rolling speed: 0/3.2~7.91m•s-1; mill opening : 400mm; thickness range of steel plate:6~150mm,width range: 1150~3700mm, length range:3000~18000mm,max.single piece weight of steel plate: 19.7t.

    Vertical Edger

    Max.rolling force: 5000KN,max.edging draft:50mm. Location: adjacent to the finishing mill stand; The edger is equipped with hydraulic AWC system functioning head and tail short stroke control to effectively improve the rectangularity of steel plate.

    MULPIC Accelerated Cooling Device

    Entire length of cooling zones:24300mm, cooling rate: max.40 ℃/s for 20mm thickness plate, max.and min. flow ratio: 20:1, functions: accelerated cooling + DQ

    Normalizing Furnace

    Five roller hearth normalizing furnace lines, plate thickness range:6~120mm, length range: 3~18m,functions: normalizing and tempering

    Quenching Machine

    The two quenching and tempering lines are all imported from German LOI. Old line: length of austenitizing furnace 36m, length of quenching machine 26m, thickness of quenching plate:8~100mm,length of quenching plate:4~16m; new line: length of austenitizing furnace 65m, length of quenching machine 23m, thickness of quenching plate:6~150mm,max.length of quenching plate:18m

    Hydraulic Flattening Machine

    The heat treatment line is equipped with a flattening machine of 50MN nominal capacity. The max. temperature of steel plate is 400℃. For a steel plate with initial average unflatness ranging from 0 to 20mm, the unflatness of steel plate after straightening can be ensured to be less than or equal to 2mm , which improves the flatness of steel plate.

    Nine Roller Hot Leveler

    The nine roller hot leveler adopts full hydraulic roll gap adjustment with max.leveling force 32000KN, calculates all parameters by model, implements accurate setups and controls, which is designed as odd pass leveling and even pass reversing.

    Finishing Line

    Mainly equipped with walking beam cooling beds of 4160m2(89m long×52m wide).The steel plate of thickness <80mm shall be transferred to turn-over device for surface inspection and grinding from cooling beds.The steel plate of thickness > 80mm shall be transferred to thick plate handling zone from cooling beds.

    The finishing line consists of automatic ultrasonic flaw detection device, crop shear, double side trimming shear, dividing shear, sample shear, marking machine, finished product size measuring gauge, cold leveler. The Rolling cut shear with automatic knife gap adjustment and automatic top and bottom blade removal functions designed by SVAI is equipped with laser aligning device and magnetic centering device.

    One 11 roller cold leveler locates at the end of the finishing line with a leveling thickness range of 5-35mm and max. leveling force up to 27500KN. The servo hydraulic system allows rapid adjustment response at all leveling stages. A scale dedusting system is also designed to ensure the surface quality of leveled plate.

    Flaw Detection Device of Steel Plate

    Two sets of on-line flaw detection devices for the flaw detection of steel plate on the production line,s with advantages of high production efficiency, short detection cycle and high detection accuracy.

    Product Mix

    12 product category series and more than 300 steel grades can be supplied by Our mill.

    (1)  Boiler and pressure vessel steel plate  
    (2)  Low alloy high strength steel plate
    (3)  Bridge structural steel plate
    (4)  High rise building structural steel plate
    (5)  Wear resistant steel plate
    (6)  Alloy structural steel plate
    (7)  Mould and Abrasion resistant steel plate
    (8)  Carbon structrual steel plate
    (9)  Shipbuilding and offshore oil platform steel plate
    (10) Clad steel plate
    (11) High strength and toughness steel plate 
    (12) Crude oil and natural gas transmission pipeline steel plate

    1. Boiler and pressure vessel steel plate 

    Boiler and pressure vessel plate

    Q245R, Q370R, 18MnMoNbR, 13MnNiMoR, Q345R, 15CrMoR, 14Cr1MoR, 12Cr2Mo1R, 12Cr1MoVR

    GB713

    07MnCrMoVR,07MnNiCrMoVDR,12MnniVR

    GB19189

    16MnDR, 09MnNiDR, 15MnNiDR

    GB3531

    SB410,SB450,SB480

    JIS G3103

    SPV235,SPV315,SPV355,SPV410,SPV450,SPV490,SB450M,SB480M

    JIS G3115

    SGV410,SGV450,SGV480

    JIS G3118

    SBV1A,SBV1B,SBV2,SBV3

    JIS G3119

    SEV245,SEV295,SEV345

    JIS G3124

    HⅠ,HⅡ,10CrMo910,15Mo3,13CrMo44,19Mn6

    DIN 17155

    CCS/410A,CCS/410B

    CCS

    A202 Grade(A,B), A203 Grade(A,B,C,D,E,F), A204 Grade(A,B,C)

    (ASME)ASTM

    A285 Grade(A,B,C), A289 Grade(A,B,C), A299 Grade(A,B), A302 Grade(A,B,C,D)

    A387 Grade 5 Class(1,2), A387 Grade 11 Class(1,2), A387 Grade 12 Class(1,2), A387 Grade 22 Class(1,2)

    A515 (60,65,70), A516 (55,60,65)

    A517(A,B,E,H,P,O), A533(A,B,C)

    A537 Class(1,2,3)
    A612M, A662 Grade (A,B,C)
    A841 Grade (A,B,C,D,E,F)

    P235GH,P265GH,P295GH,P355GH,16Mo3,13CrMo4-5,

    EN10028-2/3

    10CrMo9-10,11CrMo9-10,

    P275(NH,NL1,NL2),P355(N, NH,NL1,NL2),

    P460(NH, NL1,NL2)

    P355M, P355ML1, P355ML2, P420M, P420ML1, P420ML2, P460M, P460ML1, P460ML2 EN10028-5
    P355Q, P355QH, P355QL1, P355QL2, P460Q, P460QH, P460QL1, P460QL2, P500Q, P500QH, P500QL1, P500QL2, P690Q, P690QH, P690QL1, P690QL2 EN10028-6

    A42,A52,A48

    NF A36-205

    20MnHR,16MnHR,20HR,13MnNiMo5-4,BHW35,DIWA353,

    (Special technical specification)

    16MnD5,18MnD5,08Ni3DR,06Ni9DR,20MnNiMo,

    20MnMoNi55,20MnMoR

    2.25Cr1Mo, 1Cr0.5Mo, 2.25Cr1Mo0.25V, 1.25Cr0.5MoSi, 1.25Cr0.5Mo

    Cr-Mo steel under hydrogen condition

    2. Quenched and tempered type high strength steel plate

    Quenched and tempered type

    high strength steel plate

    Q460(C, D, E)-Q960(C ,D ,E)
    S460Q-S960Q, S460QL-S960QL, S460QL -S890QL1
    E420(DD, E),E460(D, E),E500(D, E),E550(D, E), E620(D, E),E690(D, E)
    WQ590(D, E)-WQ960(D, E)
    WH80Q, WH785E, WH100Q, WQ1100E, 1E1839, 1E0653, 1E0682

    GB/T16270
    EN10025-6
    ISO4950.3
    Q/WTB010
    (Special technical specification)

    3. Bridge structural steel plate

    Bridge structural steel p late

    Q235q-Q690q(C,D,E)
    A709M(Gr36, 50, 50W, 70W, HPS50W, HPS70W)
    14MnNbq

    GB/T714
    ASTM
    (Special technical specification)

    4. Building structural steel plate

    Building structural steel plate

    ASTM A514/A514M

    A514Grade A

    A514Grade B

    A514Grade C

    A514Grade E

    A514Grade F

    A514Grade H

    A514Grade J

    A514Grade K

    A514Grade M

    A514Grade P

    A514Grade Q

    A514Grade R

    A514Grade S

    A514Grade T

     

     

    ASTM A572/A572M

    A572Grade 42

    A572Grade 50

    A572Grade 55

    A572Grade 60

    A572Grade 65

     

     

     

    ASTM A573/A573M

    A573Grade 58

    A573Grade 65

    A573Grade 70

     

    ASME SA514/SA514M

    SA514Grade A

    SA514Grade B

    SA514Grade C

    SA514Grade E

    SA514Grade M

    SA514Grade P

    SA514Grade Q

    SA514Grade R

    SA514Grade S

    SA514Grade T

     

     

    ASME SA572/SA572M

    SA572Grade 42

    SA572Grade 50

    SA572Grade 55

    SA572Grade 60

     

    SA572Grade 65

     

     

     

    ASME SA573/SA573M

    SA573Grade 58

    SA573Grade 65

    SA573Grade 70

     

    5. Mould and Abrasion resistant steel plate

    Mould steel plate

    S45C, S55C
    SM45-SM55, SM3Cr2Mo, SM3Cr2Ni1Mo
    2711, 2738, P20, 618, 718, P80, 638, AISI4140, DIMO42H
    45-55, 50Mn-65Mn, WSM136B, 75Cr1, WSM30B, WSM35B, WSM2312B

    JIS G4051
    YB/T107
    (Special technical specification)

    Wear resistant steel plate

    NM300, NM360, NM400, NM450, NM500

    GB/T24186

    WNM320-WNM500
    WRZ400

    (Special technical specification)

    HARDOX400, HARDOX450, HARDOX500

    HARDOX

    XAR400, XAR450, XAR500

    XAR

    RAEX400, RAEX450, RAEX500

    RAEX

    6. Crude oil and natural gas transmission steel plate

    Crude oil and natural gas transmission steel

    L245-L555
    X42-X80, WFHY485, WFHY510, WFHY415, WFHY450, X80(ST)
    X65MO, X70MO

    GB/T21237
    (Special technical specification)

    Grade A (L210), Grade B (L245), API 5L X42 (L290), API 5L X46 (L320), API 5L X52 (L360), API 5L X56 (L390), API 5L X60 (L415), API 5L X65 (L450), API 5L X70 (L485)

    API Spec 5L PSL1

    Grade B (L245), X42 (L290), X46 (L320), X52 (L360), X56 (L390), X60 (L415), X65 (L450), X70 (L485), X80 (L555)

    API Spec 5L PSL2

    Typical References

    Building structural steel plate

    110mm thickness Q460E/Z35 plate developed for national stadium Bird Nest of Beijing Olympic Games is the first creation world-wide for the same application.

    Hydrogenation of Cr-Mo steel plate

    The developed Cr-Mo plate under hydrogen environment have been applied for various oil refining facilities of petrochemical industry including Jiujiang Petrochemical Plant,Changling Petrochemical Plant and coal to oil projects including Ningmei and Luan.

    Cr-Mo plate under hydrogen environment over 100mm thickness are solely supplied by Our mill at home, with a market share over 85%.

    Nuclear Island Class Steel Plate

    The developed 16MND5, 18MND5, SA533 steel plate of nuclear island class according to French and American Quality Assurance System  with  max.thickness 178mm, max.single piece 37 t  stand on the top at home, and have been applied for various nuclear power plant projects at home.

    Heavy Plant Steel Plate

    390mm thickness 20MnNiMo steel plate developed for 80,000 t die forging press  as key equipment of Large Aeroplane Project is used to substitute imports.

    High strength steel plate

    Our mill developed quenched and tempered type wear resistant steel WNM500A has been applied to manufacture the high end state of art grinding plant- φ7.93×13.6m overflow type ball mill.

    Giant Lanjing 7500 t Offshore Crane manufactured by Shanghai Zhenhua Heavy Industry Co.Ltd.

    Bridge Structural Steel Plate

    Shanghai Lupu Bridge: 18000 t steel plate used to fabricate the arched girder  are supplied by Our mill.

    Zhengzhou Huanghe Highway and Railway Bridge: 45 000 t steel plate used to build the world longest highway and railway bridge are supplied by Our mill.

    Runyang Yangtze River Bridge: 12000 t steel plate used to build the cable-suspension highway bridge with1490 m long main span are supplied by Our mill.

    53000 t steel plate used to build San Francisco New Bay Bridge –the landmark building in west coast area of USA are supplied by Our mill.

    Hydropower steel plate

    The developed 300mm thickness steel plate with Z-direction properties for hydropower plant have been certified by the State Council Three Gorges Project Construction Committee that all the properties are equivalent to those of foreign products and can be used for manufacture of 700 MW class large water turbo generator units. 

    Our mill is the only enterprise capable of producing steel plate of such thickness at home.

    Offshore engineering steel plate

    The developed 152.4mm~215mm thickness gear rack steel plate for deep sea offshore platform have passed the certification from ABS, DNV and GL as substitute of imports, forcing the import price declined by nearly 50%. The 215mm thickness plate for manufacturing gear rack of deep sea offshore shore platform is the only one passed the certification of classification societies at home

    Pipeline Steel Plate

    Our mill's pipeline steel plate have been used in West to East Natural Gas Transmission Project and Natural Gas Transmission Project from Sichuan to East China in large quantity. 26000 t X70 wide plate are used in the above second project, which breaking the monopoly of Japanese and Korean steel works on the market of steel plate for large diameter straight beam welded pipe.

    Construction site of West to East Natural Gas Transmission Project main pipeline.

    Shanghai Terminal Station

    Contact Us

    Shanghai Katalor Enterprises Co., Ltd

    0086-21-61182423
    0086-21-61182425
    [email protected]
    Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
    Live Chat
    超强媚薬中文字幕在线播放